Showing posts with label engineering. Show all posts
Showing posts with label engineering. Show all posts

Sunday, January 18, 2026

Valedictory Chief Guest Thoughts ICNTE-2026

Thank you for the kind welcome. I am truly honored and very pleased to be in the midst of this august gathering—both on the stage and in front of me. More importantly, I am delighted to be in front of the young minds present today. I am also thankful to Professor Choudhury, who made my coming here possible through the invitation and the follow‑up communication. Thank you, ma’am.

I have a couple of thoughts I would like to share, simply because of my years of professional experience may offer some perspective. One thing that strikes me is the title of this conference. The fact that it is held every two years and continues to grow indicates the energy and enthusiasm of the organizers. I am sure the conference has seen many leaps in the quality of presentations and in the novelty of the work showcased. While I have only had the opportunity to look at the titles—not the full papers—I can easily imagine that the presentations must have been valuable.

Coming back to the title, it is very apt to say that “International Conference on Nascent Technologies” One thing that stands out about this conference name is its perennial relevance. It will never become outdated. As technology changes, the content of the conference may evolve, but the name will always remain appropriate. In contrast, a name tied to a specific domain—say “knowledge‑based systems”—might become less relevant over the decades. In that sense, this title is beautifully chosen. I congratulate the organizing committee and the advisory committee for selecting such a timeless name.

Let me take the liberty of sharing a few thoughts. 

First, I want to talk about the way we write papers and technical documents. This is common advice I give to my own team of young researchers. When you step into a domain because you have read someone else’s work, it is important to acknowledge that earlier contribution. Giving credit to previous work is not optional. Literature surveys are a part of academic writing, but beyond that, proper citation is essential.

The second point I emphasize with my team is that if you want someone to really read and benefit from your manuscript, you must guide them on what they can do after reading it. A reader should not reach a dead end. They should not walk away thinking, “I know what the authors did, and I know the conclusion, but what next?” You must articulate possible extensions of your work, open questions, or new directions that arise from your study. Think of these as seeds in your paper. Without planting these seeds, there is no way for the literature to grow from what you have contributed. Citation metrics on Google Scholar may be indirectly hinting at this idea.

My third point relates to an analogy: imagine a wagon carrying goods on a railway track. Today, irrespective of the domain we work in, much of our activity touches machine learning and artificial intelligence. AI is embedded in our digital and even physical environments. For example, we hear about AI‑based washing machines. I am not entirely sure what AI they actually use—it may just be a marketing gimmick—but the point is that AI has become ubiquitous.

Now, many of us in India may not have access to the ideal infrastructure. It can feel like batting against Wasim Akram or Kapil Dev with one hand tied behind your back. The world is not always fair, and we have to work within our constraints.

In the analogy, the wagon represents the modeling mechanism—the AI model. The goods it carries represent your domain knowledge or data. The rails represent your computing infrastructure, your internet connectivity, and your processing capabilities. If you have a strong wagon (a good model), you can carry more goods (data). If your rails are smooth (good GPUs and infrastructure), everything moves effortlessly. But getting all three perfectly aligned is rare, and it requires significant investment.

In India, we often have plenty of data—large volumes of it—but our wagons may not always be large enough, and our rails may not always be world‑class. This means domain understanding becomes crucial. You might have to “massage” the data so it fits into the wagon and can move along the rails you have. If you have powerful GPUs, your approach may be different. But the key idea is this: as students, faculty members, and researchers, we must identify what we can control and use that to innovate. Complaining about what we lack—poor rails or small wagons—won’t help. Focus on what you can influence.

From the awards I saw distributed today, it is clear that this conference has been an excellent venue for all of you. One remarkable feature of this event is its inherently multidisciplinary nature. I noticed topics ranging from smart manufacturing and automation to embedded systems, networking, and security. Such multidisciplinary forums enable interaction between people from different departments or sectors. This broadens perspectives and enhances the way we think. I encourage all of you to interact with peers from other areas, because that is one of the best ways for all of us to grow together.

With these comments, I thank the organizers once again for inviting me. I truly enjoyed spending time among you. I wish you all the very best and a happy new year.

Tuesday, July 09, 2019

Things best learnt in 8 Semesters! A view

A personal (industry) view of what might be the best attribute a student can gain in each of the semester.

Friday, September 07, 2018

External Examiner of a Masters Thesis

Background
I often receive requests for examining thesis (mostly Masters in Engineering). Nothing to do with me, but to do with  my current job profile!

Note
This my incomplete list of Do's and Don't. Mostly written in one sitting.

Why am I writing it?
After having had to go through some painfully lengthy presentations which spoke more about the literature and less of what the student actually did!  And having had to listen to several supervisor say "I am not actually the project supervisor and I had to step in because of " to avoid any responsibility of what is being presented! I thought these tips will help the student plan in advance and speak their best.

Since I interact with the supervisor who organizes the evaluation. I will write as if I am addressing the supervisor; but the student should, they were to read, get the intent. 

Few Suggestions

Please have the student do the following 
  • Start with 10 minutes demonstration if there is something to be shown as part of the work {this give a good perspective to the thesis}
  • A strict 30 minutes presentation {at best 15-18 slides}
    • The first slide should contain the duration of the project and the number of hours spend on the project (example, Jan 2018 - July 2018; xxx hours) {this again gives a good perspective of the time spent in the project}
  • Start with the problem statement and highlight the main contribution of the work done {this should allow the student to think what they have contributed to the overall literature}
  • Concentrate on the work done rather than the literature (they could have the literature as backup slides - which they can refer to if required - but not to be presented)
  • Make sure the presenter knows what ever is written on the slide {there is no point in putting details that the presenter does not know, often happens with literature}
  • Ask them to spend a slide or two (and time) on the experimental results and analysis 
    • let them use graphs {when applicable}, 
    • highlight what they want to talk about in the tables; 
    • clearly articulate what they want the listener to gain from the tables|charts
  • Numerical if shown should be limited to two digits after the decimal {do not use 0.56892; use instead 0.57 to make it human readable}
  • They should be familiar with the mathematical expression on the slide - let them not put it without understanding 
  • They should proof read their thesis and the slides used for presentation
    • No more than 4-5 sentences in a slide
    • Do not read what is there on the slide {the examiner can do it too}
    • Use bullets instead of complete sentences
    • Time your presentation {a rehearsal  definitely helps}

Monday, December 05, 2016

Should Academia produce Industry Ready Engineering students?

Industry ready Engineering Graduates? 

Should we? Should we not? Can we? 

Often heard (when you speak to a person in the industry) "Today's students are not industry ready". And when one of my senior colleagues posed this question it occurred to me if it was possible at all for academic institutes to produce industry ready student and more importantly is it a good idea to produce students who can be absorbed by an industry.

The resulting thinking picture.

Understanding the plot!

On the x-axis is the time and on the y-axis is the expertise. A student when he finishes 10th standard has some expertise which is lower than when he has finished 12th standard (see the plot to the left of the above image). Clearly the expertise increases with Engineering (marked 1, 2, 3, 4) and the increase in the level of expertise is better during the 3rd and 4th year when one specializes and picks up electives.

As seen, good students have the expected expertise, however bright students (or those who have undergone industrial experience) have more than the desired expertise. These  students expertise is closest to what the industry requires. Independent of how good the student is, the need of the industry is a notch higher. So, there is certainly a gap Δe in expertise between the student who graduates and the expertise that the industry needs. And the Δe is different for different industries. May be for a services industry this is small but for an R&D (pursuing PhD) it might be large. Any may be for some kind of repetitive jobs it is that Δe = 0. 

There is this time duration Δt which is the duration between a studying student and a working professional. This is the time that the industry calls as "training period" the time taken to make a student who has graduated to being in the workforce. Industries are trying to minimize Δt, the shorted the Δt the quicker the student becomes a professional workforce provided the Δe is also small. Now the ΔtΔe (product) combined has to be minmized. Something along the lines of  heisenberg uncertainty, one can not have both of this small together. The crux of making students industry read is minimizing the ΔtΔe.

 The problem is that different industries require different expertise (hence Δe differs). Now the dilemma of an academic institute is what industry should they choose as their benchmark so that they can build the students expertise to that level. 

Suppose they set targets to match with the best employable industry. If the required competency is very high while then a majority of the students will not make it (fail to graduate) but the students who graduate would be industry ready. On the other hand, if they fall in line with an industry which requires lower expertise, then most of the students would be employable but this would result in none of the students being able to take up jobs that require higher expertise because in this event Δe required would be very very high. So the academia needs to choose some expertise level that is midway, which results in some Δe hence making most of the students not industry ready.

Aside of this. The question is should academia cater to the industry? Can they? Should they? My personal opinion is they should not make an attempt. The reason 
  • is the expertsie required in the industries change often (in the extereme case the most employable industry itself might change!) and it would be futile for academia to bet on one industry. 
  • academia should focus on producing students who can take up a professional path that he desires (if the academia latches on to one industry, it would kill the interest of some students who want to do something different)
  • academia need not be a feeder to a particular industry
  • the students need to feel the difference between they studies and their work (if they do not they will get bored in their work)

 Endnote

Making  students industry ready might be possible with careful planning between the academia and the industry, but I think this should be best avoided because such a planning will churn out student who have a smaller professional canvas.  A  wider canvas will come into play when the Δe gap indeed exists, so that students  can professionally grow in any direction that they want to. Or may be create newer professions (startups?). 

A Lesson Hidden in Two Simple Words

Sometimes profound ideas are hidden in the most ordinary places. Recently, while looking at two common English words, I stumbled upon an int...